Face Gear
The pinion is axial free. The Cylkro-Gear set consists of a standard involute pinion and a Cylkro face gear. While mounting the gear set, only the Cylkro face gear needs to be adjusted in the axial direction. The axial position of the pinion can be chosen freely within its tooth width.
.jpg)
+ Compared to conventional bevel gears, the adjustment of a Cylkro set is relatively easy.
+ Mounting deviations caused be e.g. changes in temperature, do not affect the contact pattern
+ There are no axial forces on the pinion shaft.
+ Axis angle can be chosen between 0° and 135° degrees
